GORE-TEX Fabric Repair Kit

Description

This is an essential field repair kit for all types of repairs including tents, sleeping mats, rainwear, backpacks, boots and more. The kit includes two adhesive backed Gore-Tex® fabric pressure sensitive patches.

• Pack of 2 adhesive backed Gore-Tex® fabric pressure sensitive patches
• Designed for Gore-Tex and Windstopper® fabric

Repair kit instructions

• Patches should be kept in the sealed plastic bag until used
• Area to be repaired must be clean and dry
• Patch will not adhere effectively to loose debris, grease or oil
• Patch should overlap tear by at least 0.5 in all directions
• Remove release paper from back of patch. Lay Gore™ product on a smooth flat surface and apply patch using finger pressure (adhesive side down). Rub patch surface in a circular motion from the centre out covering the entire patch area
• Product can be used immediately; however, the adhesive will continue to strengthen over the next 12 to 24 hours
• The durability of the patch can be enhanced by applying heat and moderate pressure. Use a clean iron and set to medium heat. Press with moderate pressure in a circular motion for 30 seconds